China Nema 34 Planetary Gearbox For AC Motor LE with Best Sales

Product Description

Main Products.: 

PBMD Series PBMD*HIGH PRECISION High Torque Planetary Gearbox 
PBMD40L1 1 STAGE 

STAGE VALUE 1 stage
Gear ratio i 3 4 5 7 8 10  
Rated output torque
(1000 times is allowed in gear box)
T 2N Nm 15 17 20 18 17 15  
In.lb 133 150 177 159 150 133  
T 2NOt Nm 1.5xNOM.Output/ 1.5 times rated output torque
In.lb
Rated input RPM (T2N, 20ºC environment temperature) b N 1n rpm 3000 3000 3000 3000 3000 3000  
Max. Input RPM N 1max rpm 6000 6000 6000 6000 6000 6000  
Max.backlash J t arcmin PBMD40≤5 ARCMIN
Max.radical force F 2AMAX N 300
ibf 68
Max.axial force F 3RMAX N 180
ibf 41
Max.side force M 2KMAX Nm  
In.lb  
Work life L h hr  ≥20000
Fully loaded efficiency η % 95
Environment temperature ºC -15 to 40
F 5 to 104
Allowable highest temperature
of shell
ºC +90
F 194
Lubrication   Synthetic Grease
Rotation direction   Input/output with same direction
Protection class   IP65
Installation direction   Any/ any direction
Working noise
(i=10 and n1=3000rpm no-load)
Lpa        dB(A) ≤65
Moment of inertia J1 Kg.cm² 0.3 0.3 0.3 0.3 0.3 0.3  
10-3in.lb.s2 0.3 0.3 0.3 0.3 0.3 0.3  

Product Description.: 

Low backlash high revolving speed gearbox  
Standard specification apply to high positioning accuracy and high dynamic period working system
Especially for continuously work in high revolving speed
PBMD/PBMD*HIGH PRECISION necessary way to high efficiency  

PBMD ( picture example: i=4 )
Suitable for periodic work system ( ED≤60% )

                                 Max. Input RPM (min-1)

PBMD*HIGH PRECISION  ( picture example: i=4 )
Suitable for periodic work system ( ED≤60% )
                             Max. Input RPM (min-1)

Related Products.:  

Applications.:  

PBM (standard)
Cycle Applications (ED≤60%)
High dynamic applications
High positioning accuracy
Reverse operation
PBMD*HIGH PERCISION
Application of continuous operation (ED≤60%)
High rated speed
Temperature-sensitive applications
High quality control transmission

Technical data
                            PBMD              PBMD*HIGH PRECISION
Size                           90                           90
I                            3-100                         3-100  
Jt standard ( arcmin )          ≤3,≤5                           ≤1
T2B (NM)                    4500                         3600  
N1Max(rpm)                 6000                         8000  

   1. Max. 8 Fasten hub diameter

2. Max. 8 Fasten hub diameter

Our Services.:

1) Competitive price and good quality

2) Used for transmission systems.

3) Excellent performance, long using life
4) Prompt response on receiving Inquiries or any other messages from customers
5) only standard planetary gearbox supplied

Delivery and shipping: We provide CZPT shipping, international express and air transportation to deliver your products to you.
(*Arrival time will vary depending on destination country policy and traffic condition.)

Serving: All products have a one-year warranty and online technical support. 

FAQ

Q: Are you trading company or manufacturer?

A: We are group company with large range of products and production bases, also do trading company business with more than 20 years export experiences.

Q:What’s the MOQ?

A: 1 or 2pcs is available.

Q: How long is your delivery time?

A: 3-5 days via DHL, TNT, UPS, FEDEX. Ocean shipping is based on different countries.

Packaging & Delivery

packaged in Carton with foam inside or as per customer’s requirements (Standard export canton) 
Lead Time:

Quantity(Pieces) 1 – 10 >10
Est. Time(days) 7 To be negotiated

 

To Be Negotiated 5 Pieces
(Min. Order)

###

Application: Motor, Machinery
Hardness: Soft Tooth Surface
Installation: Vertical Type
Layout: Coaxial
Gear Shape: Conical – Cylindrical Gear
Step: Single-Step

###

STAGE VALUE 1 stage
Gear ratio i 3 4 5 7 8 10  
Rated output torque
(1000 times is allowed in gear box)
T 2N Nm 15 17 20 18 17 15  
In.lb 133 150 177 159 150 133  
T 2NOt Nm 1.5xNOM.Output/ 1.5 times rated output torque
In.lb
Rated input RPM (T2N, 20ºC environment temperature) b N 1n rpm 3000 3000 3000 3000 3000 3000  
Max. Input RPM N 1max rpm 6000 6000 6000 6000 6000 6000  
Max.backlash J t arcmin PBMD405 ARCMIN
Max.radical force F 2AMAX N 300
ibf 68
Max.axial force F 3RMAX N 180
ibf 41
Max.side force M 2KMAX Nm  
In.lb  
Work life L h hr  ≥20000
Fully loaded efficiency η % 95
Environment temperature ºC -15 to 40
F 5 to 104
Allowable highest temperature
of shell
ºC +90
F 194
Lubrication   Synthetic Grease
Rotation direction   Input/output with same direction
Protection class   IP65
Installation direction   Any/ any direction
Working noise
(i=10 and n1=3000rpm no-load)
Lpa        dB(A) 65
Moment of inertia J1 Kg.cm² 0.3 0.3 0.3 0.3 0.3 0.3  
10-3in.lb.s2 0.3 0.3 0.3 0.3 0.3 0.3  

###

Quantity(Pieces) 1  10 >10
Est. Time(days) 7 To be negotiated
To Be Negotiated 5 Pieces
(Min. Order)

###

Application: Motor, Machinery
Hardness: Soft Tooth Surface
Installation: Vertical Type
Layout: Coaxial
Gear Shape: Conical – Cylindrical Gear
Step: Single-Step

###

STAGE VALUE 1 stage
Gear ratio i 3 4 5 7 8 10  
Rated output torque
(1000 times is allowed in gear box)
T 2N Nm 15 17 20 18 17 15  
In.lb 133 150 177 159 150 133  
T 2NOt Nm 1.5xNOM.Output/ 1.5 times rated output torque
In.lb
Rated input RPM (T2N, 20ºC environment temperature) b N 1n rpm 3000 3000 3000 3000 3000 3000  
Max. Input RPM N 1max rpm 6000 6000 6000 6000 6000 6000  
Max.backlash J t arcmin PBMD405 ARCMIN
Max.radical force F 2AMAX N 300
ibf 68
Max.axial force F 3RMAX N 180
ibf 41
Max.side force M 2KMAX Nm  
In.lb  
Work life L h hr  ≥20000
Fully loaded efficiency η % 95
Environment temperature ºC -15 to 40
F 5 to 104
Allowable highest temperature
of shell
ºC +90
F 194
Lubrication   Synthetic Grease
Rotation direction   Input/output with same direction
Protection class   IP65
Installation direction   Any/ any direction
Working noise
(i=10 and n1=3000rpm no-load)
Lpa        dB(A) 65
Moment of inertia J1 Kg.cm² 0.3 0.3 0.3 0.3 0.3 0.3  
10-3in.lb.s2 0.3 0.3 0.3 0.3 0.3 0.3  

###

Quantity(Pieces) 1  10 >10
Est. Time(days) 7 To be negotiated

Planetary Gearbox Components

The basic components of a planetary gearset are an input, output, and stationary position. Different types of planetary gearboxes will have different output ratios and torques. A leading company for planetary gearbox design, CZPT, provides the necessary components. These components can vary in both male and female shafts and come with a variety of modular options. Here are a few things to consider about each component.

CFHK Series

The CFHK Series is a multistage planetary gearbox that contains multiple planetary gears. The multiple teeth of each planetary gear mesh simultaneously during operation to increase the transmittable torque. The gears are case hardened and ground, and the ratios of the planetary gears are integers. They were first functionally described by Leonardo da Vinci in 1490. Today, the CFHK Series is a favorite among automotive engineers and manufacturers.
The CH Series offers high accuracy with a compact design and case hardened, hypoid, and helical gearing. These gearboxes are also available in the CFXR series, with low backlash and friction. These planetary gearboxes are designed to provide high torque and high precision in a variety of applications. In addition, the CFXR series features 100% helical gearing and low backlash.
The CFHK Series features a sun gear that drives the next stage. These gears can be put in series or serially in the same housing. In some cases, the output shaft of the first stage becomes the input shaft of the second stage. In addition, ring gears are also used as structural parts of smaller gearboxes. An example of a planetary gearbox is the pencil sharpener mechanism. The pencil is placed on an axis that is set on a sun gear. The sun gear drives the next planet stage.
A planetary gear unit’s gear ratio is determined by the number of teeth in the sun gear and ring gear. The smaller the sun gear, the smaller the ratio between the sun gear and planet gears. The largest gear ratio in a planetary gear unit is 10:1. A higher number of teeth increases the transmission ratio. In order to maximize torque, the planetary gears must be rearranged. A smaller sun gear will have higher torque than a large ring gear.
planetarygearbox

CFX Series

The HPN Harmonic Planetary(r) Series planetary gearboxes offer a low-cost solution with high-performance and high-reliability. This modular design is easy to install and requires very little maintenance. Its planetary design and full complement of needle rollers allow for extended life and quiet operation. In addition, the HPN Harmonic Planetary(r) Series is available in a range of sizes.
The compact size and high-speed design of planetary gearboxes results in excellent heat dissipation. However, high-speed or sustained performance applications may require lubricants. A planetary gearbox will have smaller minimum steps to minimize noise and vibration. Planetary gears will give you the highest level of efficiency while minimizing noise. As a result, they can provide high-quality 3D prints.
A planetary gear train is composed of a ring gear and planet gears, each supported by a carrier. A ring gear is pink, while the sun gear is red. The sun gear and carrier rotate around each other at a 45-degree angle. This is also known as an epicyclic gear. Planetary gearboxes are often found in space-constrained applications. The CFX Series features a compact design and excellent performance.
The CFX Series features a robust design that is easy to install. Its compact size makes installation of planetary gearboxes easier and faster. They are available in three different configurations for continuous, intermittent, and counter-clockwise operation. The CFX Series offers the perfect solution for your accelerating needs. They’re a great solution for any automotive or industrial application. You can easily configure the CFX Series to meet your specific requirements.

CAP Series

The Candy Controls CAP Series is a new generation of compact, precision planetary gearboxes that combine high torques with low backlash and exceptional wear resistance. This rotary flange planetary gearbox is ideal for a variety of industrial, mining and marine applications. Its modular construction enables users to easily mount different stages, hydraulic or electric motors, and different types of gears. Its CPH Series features an extremely rigid alloy steel housing, carburized gears, and induction hardened gears.
The CAP Series utilizes multiple planetary gears for high torque transmission. The number of planetary gears is not fixed, but most planetary gearboxes utilize at least three. The larger the number of planetary gears, the higher the transmittable torque. A planetary gearbox is composed of multiple planetary gears with a meshing action that occurs simultaneously during operation. The result is a higher efficiency and a smoother, quieter operation than a conventional gearbox.
The VersaPlanetary range features modular design for easy installation. This system includes mounting plates for typical FIRST (r) Robotics Competition motors. The mounting plates are designed to fit each motor. These planetary gearboxes are compatible with various types of motors, from small electric motors to large, heavy duty ones. They are also compatible with a variety of mounting systems, including CIM motors.
planetarygearbox

CAPK Series

The CZPT APK Series is a high precision, rotary flange style planetary gearbox. Its case hardened and ground gears are designed to provide excellent wear resistance, low backlash, and excellent precision. The CAPK Series offers high axial and moment load capacities in a compact housing. CZPT is the world leader in the production of planetary gearboxes. The CAPK Series features an array of high-quality, innovative features.
CZPT SMART Lubrication technology is used to keep the gears well-lubricated and reduce noise and vibration. The planetary gearbox’s 3-gear design is ideal for DIY CNC robotics. This series has a long history of quality, and CZPT uses only the best components. The CZPT 3:1 High Precision Planetary Gearbox is an excellent choice for CNC Robotics and other applications.
A multi-stage planetary gearbox combines individual ratios for a greater number of ratios. Additional planetary gears increase the transmittable torque. The direction of the output and drive shaft are always identical. The CAPK Series features a high-quality, durable construction. They are made from stainless steel and offer a long-term warranty. They are the best choice for industrial and commercial applications. While planetary gears are more expensive, they are highly efficient.

CFH Series

The Candy CFH Series planetary gearboxes offer the benefits of a modular design and a low backlash. They offer a variety of size options and excellent durability. This planetary gearbox is compact and wear resistant. The CFH Series planetary gearbox has a carburized, induction hardened gears and a rigid alloy steel housing. Its low backlash and precision make it an excellent choice for industrial applications.
The CFH Series planetary gearbox is a highly efficient, high-speed helical gear. The compact design of this gearbox results in high heat dissipation and low mass inertia. Planet carrier bearings experience significant lateral forces from the transmission of torque. As a result, radial and axial forces oppose each other. The result is that the torque is distributed over three gears, reducing noise, vibration, and wear.
The planetary gearbox has three main components: a sun gear (also known as the input gear), a ring gear, and two planet gears. These are connected by a carrier that rotates about a 45-degree clockwise axis. The CFH Series of gears is available in triple and double stages. They can also be used in electric motors. As a result, the CFH Series is highly versatile.
The CFH Series of planetary gearboxes can be found in all kinds of applications, including automotive transmissions. Their compact design and high-performance performance make them a popular choice for space-constrained applications. This gearbox has several benefits and is a great alternative to a conventional helical gearbox. These gearboxes are highly effective for reducing torque and speed, and are compact enough to fit in most applications.
planetarygearbox

CZPT

If you need a high-quality planetary gearbox, the CZPT Planetary Series is the right choice. This Italian company designs and manufactures gearboxes in its San Polo d’Enza, Italy, facility with 11 branch offices and three production facilities. The company is attempting to replicate the success of the Italian Super Car industry, which has gained global recognition. The company provides a range of gearboxes for use in heavy industry, agriculture, offshore, aerial and marine work.
With over 40 years of experience, CZPT manufactures a wide range of high-quality gearboxes. From bevel-helical units to Helical units, wheel gears and negative brakes, the company has been manufacturing quality components for many industries. CZPT is a trusted Australian distributor of CZPT gear components. The company is dedicated to providing the best planetary gears for every industry.
If your CZPT Planetary gearbox is malfunctioning, you can have it repaired quickly and easily. The company uses quality materials and a variety of sizes and output ratios to cater to the most demanding applications. In addition, you can customize your gearbox to suit your specific needs. CZPT Planetary Gearboxes are highly versatile and customizable, offering infinite scalability.

China Nema 34 Planetary Gearbox For AC Motor LE     with Best Sales China Nema 34 Planetary Gearbox For AC Motor LE     with Best Sales
editor by czh 2022-12-08